The Armstrong S-480 Commercial Floor Polish is a broad spectrum, high-performance acrylic polish designed for resilient floors. Dries bright enough for use as a scrub and recoat. This Armstrong floor polish can also be used to create the high-gloss effect when applied with a high-speed buffer.
- Excellent general-purpose commercial floor polish for use on most vinyl, asphalt and rubber tile, linoleum, terrazzo, ceramic and slate; do not use for wood or marble
- Metal cross-linked acrylic copolymer emulsion polish that is highly durable for long-lasting protection
- Let dry 30 minutes between coats; do not apply more than 4 coats of polish at once; wait a minimum of 24 hours before applying more polish
- Milky in color, but dries clear and bright for areas where buffing is not applicable or desired
- 1,500 to 2,000 square feet/gallon/coat depending on surface characteristics of the floor
- 2 year shelf life if not opened; keep from freezing
- To prepare floor, sweep or vacuum thoroughly, wash with S-485 Armstrong Floor Cleaner, rinse thoroughly, allow floor to dry
- For low traffic polish, pour polish in a clean bucket and using a clean finish mop (acrylic) or finish applicator apply 3 to 5 coats allowing 30 minutes drying time between coats
- For high traffic polish, follow low traffic polish instructions then high speed burnish or spray buff or apply 1 or 2 extra coats












Reviews
There are no reviews yet.